| Specifications |
|
Input |
|
Pressure Range |
Vacuum to 400 bar (6000 psi) 0 -25 bar Absolute |
|
Proof Pressure |
2 x Full Scale (FS) (1.5 x FS for 400 bar, >= 5000) |
|
Burst Pressure |
>35 x FS <= 6 bar (100 psi)
>20 x FS >= 60 bar (1000 psi)
>5 x FS <= 400 bar (6000 psi) |
| Fatigue Life |
Designed for more than 100 million FS cycles |
|
Performance |
|
Long Term Drift |
0.2% FS/year (non-cumulative) |
|
Accuracy |
0.25% FS typical (optional 0.15% FS) |
|
Thermal Error |
1.5% FS typical (optional 1% FS) |
|
Compensated Temperatures |
-20°F to 80°F (-5°C to 180°C) |
|
Operating Temperatures |
-40°C to 125°C (-22°F to 260°F) for elec. codes A, B, C, 1
-20°C to 80°C (-5°F to 180°F) for elec. codes 2, D, G, 3
-20°C to 50°C (-5°F to 125°F) for elec. codes F, M, P |
|
Zero Tolerance |
1% span |
|
Span Tolerance |
1% span |
|
Response Time |
0.5 ms |
|
Mechanical Configuration |
|
Pressure Port |
See ordering chart |
|
Wetted Parts |
17-4 PH Stainless Steel |
|
Electrical Connection |
See ordering chart |
|
Enclosure |
316 SS, 17-4 PH ss
IP65 for elec. codes A, B, C, D, G, 1, 2, 3
IP67 for elec. code F
IP68 for elec. code M
IP30 for elec. code "3" with flying leads |
|
Vibration |
70g, peak to peak sinusoidal, 5 to 2000 Hz
(Random Vibration: 20 to 200 Hz @ =20g Peak per MIL-STD.-810E Method 514.4) |
|
Acceleration |
100g steady acceleration in any direction 0.032% FS/g for 1 bar (15 psi) range decreasing logarithmically to 0.0007% FS/g for 400 bar (6000 psi) range |
|
Shock |
20g, 11 ms, per MIL-STD.810E
Method 516.4 Procedure I |
|
Approvals |
CE, ETL Intrinsically Safe for Class 1, Div. 1, Groups C & D (also available as BASEEFA ATEX intrinsically safe - contact factory for part numbers) |
|
Weight |
Approx. 100 grams (additional; cable 75 g/m) |
|
Millivolt Output |
|
Output |
100 mV (10 mv/v) |
|
Supply Voltage (Vs) |
10 Vdc (15 Vdc max.) Regulated |
|
Bridge Resistance |
2600-6000 Ohms |
|
Voltage Output Units |
|
Output |
See ordering chart |
|
Supply Voltage (Vs) |
1.5 Vdc above span to 35 Vdc @ 6 mA |
|
Supply Voltage Sensitivity |
0.01% FS/Volt |
|
Min. Load Resistance Current Consumption |
(FS output / 2) K Ohms
Approx. 6 mA at 7.5V output |
|
Current Output Units |
|
Output |
4-20 mA (2 wire) |
|
Supply Voltage (Vs) |
24 Vdc, (7-35 Vdc) Above 100°C supply limited to 24 Vdc |
|
Supply Voltage Sensitivity |
0.01% FS/Volt |
|
Max. Loop Resistance |
(Vs-7) x 50 ohms |
